Price
- No products in the cart.
-
-
-
specifications: [[item.skuinfo]]
price: [[item.currency]][[item.price]]
[[item.currency]][[item.allPrice]]
-
-
-
YOU MAY ALSO LIKE
[[item.currency]][[item.discount_price]] [[item.currency]][[item.price]]
ADD
36V 10A Lithium Battery Charger for RV, Marine, Solar, Off Grid Trolling Motor, Lawn Mower
How to Standardize and Safely Use Chargers to Charge Batteries?
Important Tips:
-
When using your charger to charge the battery, first check if the load power of your device exceeds the load power of the battery BMS. The battery BMS itself has overcharging and discharging protection functions. Carefully read the user manual about the max load power datasheet.
-
You must first connect the charger to the battery module, after connecting it to the mains power on the wall to prevent damage to the charger due to hot swapping. Otherwise, sparks will come out.
-
To fully charge the battery, please turn off and disconnect your usage device/application (Golf Cart/Solar System/RV/Boat, etc.) while charging, and avoid your device having a self-discharge power function and leakage function.
-
There is a new backup fuse and charger user manual in your charger package box. You should first check if the fuse of the charger is intact and carefully read the user manual for proper and safe use of the charger.
-
You need to pay attention to checking whether the positive and negative poles of the crocodile clip charger are correctly aligned and matched with the positive and negative poles of the battery terminals. There are positive and negative pole markings on the battery casing, with the red crocodile clip being the positive pole and the black crocodile clip being the negative pole.
-
You first clamp the battery correctly with the positive and negative electrodes of the crocodile clip and then connect the power supply to the wall. The charger must first be connected to the battery and finally to the wall power supply. Please check the ON/OFF Switch: "o" is powered off, and "-" is powered on. Please button the "-" powered on while charging.
-
When you finish using the device every time, remember to replenish the power to your battery in a timely manner to avoid excessive discharge of the battery causing the low voltage to enter a sleep state. When you finish charging, please turn off and disconnect your usage device/application (Golf Cart/Solar System/RV/Boat), remember to turn off the power switch of the charger in a timely manner, and avoid your device having a self-discharge power function and leakage function.
-
When the charger completes charging the battery, the battery terminals should be disconnected in a timely manner. The charger should not be hung on the battery all the time, otherwise, it will lead to repeated over-discharge and overcharging, which will cause damage to the charger and battery module at the same time. The charger cannot be fixed on the golf cart compartment or other application devices all the time. The compartment is filled with a lot of dust, and the compartment will be damp for a long time, which can cause safety hazards such as short circuits, explosions, and smoking of the charger. After each use, the charger must be placed back in a clean charging box.
36 VOLT BATTERY CHARGER [widely used]: Ideal for 36 Volts Rechargeable Deep Cycle LifePo4 Lithium Iron Phosphate Batteries. Providing a max 10 amps charging current quickly fills your Marine Trolling Motor, ultra-high power, deep cycle battery charging, and does not damage the battery. Suitable for RV, vans, trucks, marine, solar off-grid, agricultural vehicles, ships, motorboats, lawnmowers, boats, SUVs, backup Power, UPS Outage, etc.
Protection and Maintenance for 36V Lithium Battery: Fast intelligent charger, Multilevel Protections guard against Over voltage protection, Software over-voltage protection, over-temperature protection, short circuit protection, current limiting protection, and reverse polarity protection with the Cooling system, refractory material, safe and reliable. Safe and Secure - Automatic Shutdown when fully charging.
Smart and Efficiently - Lifepo4 smart charger implements the special 2-stage constant current/constant voltage (CC/CV/Cut off) charge algorithm. This charger protects your LiFePO4 battery's delicate structure by boosting charging efficiency and maximizing lifespan through its careful utilization of the CC/CV algorithm regardless if the battery has a BMS or not.【2 LED indicator light】When charging, LED 1 Red Power on, LED 2 Red charging/Green fully charged
Golf Cart 36V Battery Charger-Optimized for Any Climate: More precise charging in hot and cold climates because of our new integrated thermal sensor. Avoids under-charging in cold weather down to -13℉, meanwhile, avoids over-charging in hot weather up to 104℉. Automatically and intelligently adjust the charging current to prolong battery life.
Durable Quality and Cooling System: The durable shell and cooling fan allow the charger's exterior to function as a heat sink with over-heating protection. In the test, it makes more than 30,000 POH(power on hours).To recharge and maintain Lithium-Ion Phosphate (LiFePO4) batteries — maximizing their performance and lifespan, we suggest using a dedicated lifepo4 battery charger to ensure you get the best out of your Lifepo4 Lithium batteries.
product information:
| Attribute | Value | ||||
|---|---|---|---|---|---|
| manufacturer | OCELL | ||||
| brand | OCELL | ||||
| model | 43.8V 10A LiFePO4 charger | ||||
| item_weight | 4.69 pounds | ||||
| product_dimensions | 2.8 x 8.3 x 4.7 inches | ||||
| country_of_origin | China | ||||
| item_model_number | 43.8V 10A LiFePO4 charger | ||||
| manufacturer_part_number | 43.8V 10A LiFePO4 charger | ||||
| customer_reviews |
| ||||
| best_sellers_rank | #350,364 in Automotive (See Top 100 in Automotive) #974 in Battery Chargers | ||||
| date_first_available | December 8, 2023 |
